三菱 M700V 三菱-M700V M70 系列 教學 手冊
所屬類別：三菱
>> 伺服驅(qū)動器和伺服電機
資料介紹：
Note that even items ranked as " CAUTION", may lead to major results depending on the situation. In any case,
important information that must always be observed is described.
Not applicable in this manual.
Items related to operation
If the operation start position is set in a block which is in the middle of the program and the program is
started, the program before the set block is not executed. Please confirm that G and F modal and
coordinate values are appropriate. If there are coordinate system shift commands or M, S, T and B
commands before the block set as the start position, carry out the required commands using the MDI, etc.
If the program is run from the set block without carrying out these operations, there is a danger of
interference with the machine or of machine operation at an unexpected speed, which may result in
breakage of tools or machine tool or may cause damage to the operators.
Under the constant surface speed control (during G96 modal), if the axis targeted for the constant surface
speed control moves toward the spindle center, the spindle rotation speed will increase and may exceed
the allowable speed of the workpiece or chuck, etc. In this case, the workpiece, etc. may jump out during
machining, which may result in breakage of tools or machine tool or may cause damage to the operators.
When the user may be subject to imminent fatalities or major injuries if handling is
mistaken.
When the user may be subject to fatalities or major injuries if handling is mistaken.
When the user may be subject to bodily injury or when physical damage may occur if
handling is mistaken.
DANGER
WARNING
CAUTION
DANGER
WARNING
伺服控制器 MR-J2S-22KB
控制器放大器總線電纜 MR-J2HBUS1M-A
PLC FX1S-10MT-ESS/UL
模擬量輸入模塊 AJ35T-M04B-K
PLC FX1S-30MT-ES/UL
PLC FX2N-128MT-001
PLC FX3G-60MT/ESS
控制器放大器總線電纜 MR-J2HBUS5M-A
PLC FX3U-48MT/ESS
伺服馬達 HA-LFS701MB
伺服馬達 HF-MP73
伺服驅(qū)動器 MR-J2S-20A
伺服電機 HC-MFS43B
伺服電機 HC-MFS43K
伺服控制器 MR-J2S-30KA4
PLC FX2N-16MT-DSS
編碼器用電纜 MR-EKCBL10M-H
PLC FX2N-64MR-001
Q系列編程器ATA卡 Q2MEM-32MBA
伺服控制器 MR-J2S-350A
伺服電機電源用電纜 MR-PWS1CBL10M-A2-L
PLC FX1N-40MT-ESS/UL
伺服電機 HC-MFS13B
PLC FX2N-48MR-D
PLC FX2N-80MR-DS
伺服控制器 MR-J2S-22KA
伺服電機電源用電纜 MR-PWS2CBL03M-A1-L
編碼器電纜 MR-JHSCBL30M-L
CF卡 GT05-MEM-1GC
嵌入型I/O模塊 AJ65MBTL1N-16T
important information that must always be observed is described.
Not applicable in this manual.
Items related to operation
If the operation start position is set in a block which is in the middle of the program and the program is
started, the program before the set block is not executed. Please confirm that G and F modal and
coordinate values are appropriate. If there are coordinate system shift commands or M, S, T and B
commands before the block set as the start position, carry out the required commands using the MDI, etc.
If the program is run from the set block without carrying out these operations, there is a danger of
interference with the machine or of machine operation at an unexpected speed, which may result in
breakage of tools or machine tool or may cause damage to the operators.
Under the constant surface speed control (during G96 modal), if the axis targeted for the constant surface
speed control moves toward the spindle center, the spindle rotation speed will increase and may exceed
the allowable speed of the workpiece or chuck, etc. In this case, the workpiece, etc. may jump out during
machining, which may result in breakage of tools or machine tool or may cause damage to the operators.
When the user may be subject to imminent fatalities or major injuries if handling is
mistaken.
When the user may be subject to fatalities or major injuries if handling is mistaken.
When the user may be subject to bodily injury or when physical damage may occur if
handling is mistaken.
DANGER
WARNING
CAUTION
DANGER
WARNING
伺服控制器 MR-J2S-22KB
控制器放大器總線電纜 MR-J2HBUS1M-A
PLC FX1S-10MT-ESS/UL
模擬量輸入模塊 AJ35T-M04B-K
PLC FX1S-30MT-ES/UL
PLC FX2N-128MT-001
PLC FX3G-60MT/ESS
控制器放大器總線電纜 MR-J2HBUS5M-A
PLC FX3U-48MT/ESS
伺服馬達 HA-LFS701MB
伺服馬達 HF-MP73
伺服驅(qū)動器 MR-J2S-20A
伺服電機 HC-MFS43B
伺服電機 HC-MFS43K
伺服控制器 MR-J2S-30KA4
PLC FX2N-16MT-DSS
編碼器用電纜 MR-EKCBL10M-H
PLC FX2N-64MR-001
Q系列編程器ATA卡 Q2MEM-32MBA
伺服控制器 MR-J2S-350A
伺服電機電源用電纜 MR-PWS1CBL10M-A2-L
PLC FX1N-40MT-ESS/UL
伺服電機 HC-MFS13B
PLC FX2N-48MR-D
PLC FX2N-80MR-DS
伺服控制器 MR-J2S-22KA
伺服電機電源用電纜 MR-PWS2CBL03M-A1-L
編碼器電纜 MR-JHSCBL30M-L
CF卡 GT05-MEM-1GC
嵌入型I/O模塊 AJ65MBTL1N-16T
上一條：
下一條：相關(guān)下載
