三菱 M700V 三菱-M700V M70 系列 教學 手冊
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
Note that even items ranked as " CAUTION", may lead to major results depending on the situation. In any case,
important information that must always be observed is described.
Not applicable in this manual.
Items related to operation
If the operation start position is set in a block which is in the middle of the program and the program is
started, the program before the set block is not executed. Please confirm that G and F modal and
coordinate values are appropriate. If there are coordinate system shift commands or M, S, T and B
commands before the block set as the start position, carry out the required commands using the MDI, etc.
If the program is run from the set block without carrying out these operations, there is a danger of
interference with the machine or of machine operation at an unexpected speed, which may result in
breakage of tools or machine tool or may cause damage to the operators.
Under the constant surface speed control (during G96 modal), if the axis targeted for the constant surface
speed control moves toward the spindle center, the spindle rotation speed will increase and may exceed
the allowable speed of the workpiece or chuck, etc. In this case, the workpiece, etc. may jump out during
machining, which may result in breakage of tools or machine tool or may cause damage to the operators.
When the user may be subject to imminent fatalities or major injuries if handling is
mistaken.
When the user may be subject to fatalities or major injuries if handling is mistaken.
When the user may be subject to bodily injury or when physical damage may occur if
handling is mistaken.
DANGER
WARNING
CAUTION
DANGER
WARNING
編碼器接頭 MR-J2CNS
編碼器電纜 MR-JCCBL30M-L
伺服控制器 MR-J2S-30KA4
閃存卡 QD81MEM-8GBC
PLC FX1S-30MR-001
GT16觸摸屏 GT1675M-STBD
定位控制模塊 A1SD75M3
編碼器接頭 MR-J3JCBL03M-A1-L
伺服放大器 MR-J2S-70B
可選功能板 GT15-MESB48M
伺服電機電源用電纜 MR-PWS1CBL5M-A1-L
PLC FX2N-32MR-DS
電機電源用接頭套件 MR-PWCNS4
PLC FX2N-32MR-001
伺服馬達 HA-LFS45K1M4
伺服驅動器 MR-J2S-45KA4
嵌入型I/O模塊 AJ65MBTL1N-32D
伺服電機電源用電纜 MR-PWS1CBL5M-A1-H
PLC FX2N-128MT-ESS/UL
伺服電機電源用電纜 MR-PWS1CBL10M-A2-H
PLC FX2N-64MR-DS
個人電腦通信電纜 MR-CPCATCBL3M
PLC FX2NC-16MT-D/UL
PLC FX3G-60MT/ES-A
模擬量輸入模塊 AJ35T-M04B-R
PLC FX2N-48MR-UA1/UL
伺服放大器 MR-J3-20B
PLC FX2N-64MT-ESS/UL
模擬量輸入模塊 AJ35T-M16B-L
PLC FX1S-10MT-ES/UL
important information that must always be observed is described.
Not applicable in this manual.
Items related to operation
If the operation start position is set in a block which is in the middle of the program and the program is
started, the program before the set block is not executed. Please confirm that G and F modal and
coordinate values are appropriate. If there are coordinate system shift commands or M, S, T and B
commands before the block set as the start position, carry out the required commands using the MDI, etc.
If the program is run from the set block without carrying out these operations, there is a danger of
interference with the machine or of machine operation at an unexpected speed, which may result in
breakage of tools or machine tool or may cause damage to the operators.
Under the constant surface speed control (during G96 modal), if the axis targeted for the constant surface
speed control moves toward the spindle center, the spindle rotation speed will increase and may exceed
the allowable speed of the workpiece or chuck, etc. In this case, the workpiece, etc. may jump out during
machining, which may result in breakage of tools or machine tool or may cause damage to the operators.
When the user may be subject to imminent fatalities or major injuries if handling is
mistaken.
When the user may be subject to fatalities or major injuries if handling is mistaken.
When the user may be subject to bodily injury or when physical damage may occur if
handling is mistaken.
DANGER
WARNING
CAUTION
DANGER
WARNING
編碼器接頭 MR-J2CNS
編碼器電纜 MR-JCCBL30M-L
伺服控制器 MR-J2S-30KA4
閃存卡 QD81MEM-8GBC
PLC FX1S-30MR-001
GT16觸摸屏 GT1675M-STBD
定位控制模塊 A1SD75M3
編碼器接頭 MR-J3JCBL03M-A1-L
伺服放大器 MR-J2S-70B
可選功能板 GT15-MESB48M
伺服電機電源用電纜 MR-PWS1CBL5M-A1-L
PLC FX2N-32MR-DS
電機電源用接頭套件 MR-PWCNS4
PLC FX2N-32MR-001
伺服馬達 HA-LFS45K1M4
伺服驅動器 MR-J2S-45KA4
嵌入型I/O模塊 AJ65MBTL1N-32D
伺服電機電源用電纜 MR-PWS1CBL5M-A1-H
PLC FX2N-128MT-ESS/UL
伺服電機電源用電纜 MR-PWS1CBL10M-A2-H
PLC FX2N-64MR-DS
個人電腦通信電纜 MR-CPCATCBL3M
PLC FX2NC-16MT-D/UL
PLC FX3G-60MT/ES-A
模擬量輸入模塊 AJ35T-M04B-R
PLC FX2N-48MR-UA1/UL
伺服放大器 MR-J3-20B
PLC FX2N-64MT-ESS/UL
模擬量輸入模塊 AJ35T-M16B-L
PLC FX1S-10MT-ES/UL
上一條：
下一條：相關下載
