三菱 三菱-手冊_JY997D16601e
所屬類別：三菱
>> 伺服驅動器和伺服電機
資料介紹：
has been written to be used by trained and competent personnel. The definition of such a person or
persons is as follows;
a) Any engineer who is responsible for the planning, design and construction of automatic equipment
using the product associated with this manual should be of a competent nature, trained and qualified
to the local and national standards required to fulfill that role. These engineers should be fully aware of
all aspects of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the
local and national standards required to fulfill that job. These engineers should also be trained in the
use and maintenance of the completed product. This includes being completely familiar with all
associated documentation for the said product. All maintenance should be carried out in accordance
with established safety practices.
c) All operators of the completed equipment should be trained to use that product in a safe and
coordinated manner in compliance to established safety practices. The operators should also be
familiar with documentation which is connected with the actual operation of the completed equipment.
Note: the term 'completed equipment' refers to a third party constructed device which contains or uses
the product associated with this manual
• This product has been manufactured as a general-purpose part for general industries, and has not been
designed or manufactured to be incorporated in a device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine
or passenger movement vehicles, consult with Mitsubishi Electric.
• This product has been manufactured under strict quality control. However when installing the product
where major accidents or losses could occur if the product fails, install appropriate backup or failsafe
functions in the system.
• When combining this product with other products, pleas e confirm the standard and the code, or regulations
with which the user should follow. Moreover, please confirm the compatibility of this product to the system,
machine, and apparatus with which a user is using.
• If in doubt at any stage during the installation of t he product, always consult a professional electrical
engineer who is qualified and trained to the local and national standards. If in doubt about the operation or
use, please consult the nearest Mitsubishi Electric distributor.
• Since the examples indicated by this manual, technical bulletin, catalog, etc. are used as a reference,
please use it after confirming the function and safety of the equipment and system. Mitsubishi Electric will
accept no responsibility for actual use of the product based on these illustrative examples.
• This manual content, specification etc. may be changed without a notice for improvement.
• The information in this manual has been carefully checked and is believed to be accurate; however, you
have noticed a doubtful point, a doubtful error, etc., please contact the nearest Mitsubishi Electric
distributor.
串行通訊模塊 QJ71C24N-R2
調制解調器接口模塊 QJ71CMO
模塊 AJ71J92-S3
DC 輸入/繼電器輸出模塊 AJ65BTB2-16DR
輸入模塊 AJ65SBTB1-16D
DC 輸入/晶體管輸出模塊 AJ65SBTB1-32DT3
CC-Link IE控制模塊 QJ71GP21-SX
伺服驅動器 MR-J2S-37KA4
DC 輸入/晶體管輸出模塊 AJ65SBTB1-32DT2
可控硅輸出模塊 AJ35TJ-8S1
伺服驅動器 MR-J2S-15KB4
晶體管輸出模塊 AJ65BTC1-32T
編碼器接頭 MR-J3ENCBL2M-A2-H
網絡模塊 AJ71QE71N3-T
SSCNET Ⅲ 光纖 MR-J3BUS5M-A
主控模塊 A1SJ71PT32-S3
伺服控制器 MR-J2S-22KA
模塊 AJ71P41
DC 輸入模塊 AJ65SBTC1-32D1
DC 輸入模塊 AJ65SBTC4-16DN
AC 輸入/繼電器輸出模塊 AJ35PTF-56AR
DC 輸入模塊 AJ65BTC1-32D
DC 輸入模塊 AJ65VBTCE3-16DE
RS-232接口模塊 AJ65BT-R2N
輸入輸出模塊 A0J2-E28AR
伺服放大器 MR-J2S-45KB4
網絡模塊 AJ71QBR11
網絡模塊 AJ72QLR25
Ethernet模塊 AJ71QE71N-B2
DC 輸入/晶體管輸出模塊 AJ65SBTC1-32DT2
上一條：
下一條：相關下載
