三菱 QnA 三菱-QnA Series 以太網 Interface Module User's Manual (Hardware)
資料介紹：
CAUTION
z Use the PLC in the environment given in the general specifications section
of the user's manual to be used. Using the PLC outside the range of the
general specifications may result in electric shock, fire, or erroneous
operation or may damage or degrade the product.
z Insert the fixing latch on the bottom of the module into the fixing hole in the
base unit and install the module using the hole point as a fulcrum. (The
Q2AS series module shall be fastened by screws in the base unit at the
specified torque.)
Not installing the module correctly could result in erroneous operation,
damage, or pieces of the product falling.
z Tighten the screw within the range of specified torque.
If the screws are loose, it may result in fallout, short circuits or malfunction.
Tightening the screws to far may cause damage to the screw and/or the
module, resulting in fallout, short circuits or malfunction.
z Shut off all phases of the external power supply in the system before
mounting or dismounting the module.
If you do not switch off the external power supply, it will cause electric
shock or damage to the product.
z Do not touch the electronic parts or the module conducting area directly.
It may cause erroneous operation or failure.
電源模塊 Q62P
對應SSCNET III定位模塊 QD75MH1
老款小A系列擴展基板 QA1S65B
定位模塊 QD75P1，QD75P2，QD75P4
過程CPU Q12PHCPU
冗余CPU數據跟蹤電纜 QC10TR
過程CPU Q12PHCPU，Q25PHCPU
性能型QCPU Q25HCPU
擴展基板 Q612B，Q63B，Q55B
主基板 Q312B
熱電偶型溫度調節模塊(升級版) Q64TCTTBWN
Q總線電纜用氧化鐵磁芯組（兩副） GT15-QFC
鉑電阻型溫度調節模塊(升級版) Q64TCRTBWN
QCPU（Q模式）用總線連接電纜 GT15-QC150BS
性能型QCPU Q06HCPU
熱電偶型溫度調節模塊(升級版) Q64TCTTN
網絡模塊 AJ71QBR11
過程CPU Q06PHCPU
通用型CPU Q00UJCPU
電壓/電流輸出模擬量模塊 Q62DAN
定位模塊 QD70P8
QCPU（Q模式）用總線連接電纜 GT15-QC100B
網絡模塊 AJ72QLR25
ID接口模塊 QD35ID2
AC型輸入模塊 QX10
GT10觸摸屏 GT1040-QBBD
電源模塊 Q61P-A1，Q62P，Q64P
Q系列PLC大容量電池 Q7BAT
帶以太網類型的Q系列CPU Q06UDEHCPU
網絡模塊 A1SJ72QLP25
上一條：
下一條：相關下載
